GRANDVIEW
Edge Series ALR Fixed Frame Screen / PE-L
A permanent grey ALR viewing surface in a slim black frame, designed for an ultra-short-throw projector below the image.
GRANDVIEW Edge series / PE-L
A fixed surface for UST viewing.
The Edge PE-L keeps a grey ALR viewing surface permanently on the wall inside a slim black frame. It suits a dedicated viewing position with an ultra-short-throw projector below the screen, in living rooms and other spaces where room lighting needs consideration.
- Screen type
- Wall-mounted fixed frame
- Viewing surface
- Black Grid DY3 ALR / 0.5 gain
- Warranty
- 36 months
Ultra-short-throw projection only. Confirm the projector-to-screen geometry and lighting direction; the ALR surface does not compensate for incorrect projector placement.
A slim border around a tensioned surface.
The Edge brochure shows a split frame, reinforced corners and multi-point spring tension. The database identifies Black Grid DY3 ALR fabric at 0.5 gain; exact frame dimensions and current-stock details need confirmation.
Slim perimeter and covered corners
A narrow black border surrounds the image. The brochure shows covered corners, split frame rails and corner brackets; confirm the supplied kit and full assembly manual before installation.
Multi-point spring support
Springs around the frame support the viewing surface. Protect the fabric from folds and creases, and follow the supplied assembly instructions for tensioning and mounting.
Directional Black Grid ALR
The UST-only fabric is intended to reduce ambient-light influence. Plan the projector below the image and assess room lighting; the database describes a wide viewing angle without a numeric angle.
Size, frame and projector placement.
Choose the diagonal size, confirm the supplied frame dimensions, then plan the wall and UST projector position.
05 Both sizes mm unless noted / retail ex GST
| Model | Diagonalin | Format | Gain | Overall size | Weight | PriceSGD ex GST |
|---|---|---|---|---|---|---|
| PE-L100W | 100 | 16:9 | 0.5 | Confirm | Confirm | S$1,284.40 |
| PE-L120W | 120 | 16:9 | 0.5 | Confirm | Confirm | S$1,605.50 |
07 Check the room
- Use an ultra-short-throw projector below the viewing area. Check its model-specific throw and image-height requirements.
- Assess lighting direction. ALR can reduce ambient-light influence, but does not remove every light source or guarantee contrast in every room.
- Use the included wall brackets with fixings suited to the wall. Confirm the model weight and fixing positions before choosing anchors.
- The database calls for 10 cm clearance for a recessed installation. Confirm which clearances and service access are required for the actual frame.
08 Construction and mounting overview
Frame details / illustrative, not to scale
Spring tension
Multiple springs tension the fabric around the frame.
Covered corner
The outer covering protects the frame corner.
Split frame joint
A connecting plate joins the split frame sections.
Corner bracket
An internal bracket reinforces the frame corner.
Brochure construction details, shown as separate views rather than an assembly sequence. Profiles and fixing positions are schematic; follow the supplied PE-L installation manual.
Before assembly
- Check the supplied rails, corner pieces, tension springs and mounting brackets against the kit list.
- Protect the directional ALR fabric from folds, creases and sharp objects.
- Confirm fabric orientation and follow the supplied manual for assembly and tensioning.
- Confirm wall strength, fixing positions and level mounting before lifting the assembled screen.
The available brochure shows construction features rather than a complete assembly sequence. Obtain the current PE-L installation manual before assembly; this overview is an illustrative planning reference.
09 Care and surface protection
Protect the ALR surface
- Clean the surface with a soft, dry cloth only, following the product records.
- Do not fold or crease the fabric. Keep hands, pens and sharp objects away from it.
- Avoid moisture and abrasive or chemical cleaners.
Use and maintenance
- Keep the frame level and securely mounted. Do not hang objects from the frame or fabric.
- Contact Big Shine for operating, tensioning or maintenance questions; follow the supplied model manual.
- Both models carry a 36-month manufacturer warranty in the database.
- Sizes, gain, warranty and retail ex-GST prices follow the verified database snapshot. Missing frame measurements and weights remain confirmation items.
- Room studies, material studies, operation and technical drawings are illustrative planning references. Confirm the current supplied model, fabric, kit and installation.
- See the original GRANDVIEW product page. Cleaning guidance follows the database.
See it in action
Gallery
Original manufacturer construction reference. Obtain exact frame dimensions, weight and the complete assembly manual for the supplied kit.
